Wednesday, April 27, 2011

Home Brew for the Car, Not the Beer Cup

WHAT if you could make fuel for your car in your backyard for less than you pay at the pump? Would you?

The first question has driven Floyd S. Butterfield for more than two decades. Mr. Butterfield, 52, is something of a legend for people who make their own ethanol. In 1982, he won a California Department of Food and Agriculture contest for best design of an ethanol still, albeit one that he could not market profitably at the time.

Now he thinks that he can, thanks to his partnership with the Silicon Valley entrepreneur Thomas J. Quinn. The two have started the E-Fuel Corporation, which soon will announce its home ethanol system, the E-Fuel 100 MicroFueler. It will be about as large as a stackable washer-dryer, sell for $9,995 and ship before year-end.

The net cost to consumers could drop by half after government incentives for alternate fuels, like tax credits, are applied.

The MicroFueler will use sugar as its main fuel source, or feedstock, along with a specially packaged time-release yeast the company has developed. Depending on the cost of sugar, plus water and electricity, the company says it could cost as little as a dollar a gallon to make ethanol. In fact, Mr. Quinn sometimes collects left-over alcohol from bars and restaurants in Los Gatos, Calif., where he lives, and turns it into ethanol; the only cost is for the electricity used in processing.

In general, he says, burning a gallon of ethanol made by his system will produce one-eighth the carbon of the same amount of gasoline.

“It’s going to cause havoc in the market and cause great financial stress in the oil industry,” Mr. Quinn boasts.

He may well turn out to be right. But brewing ethanol in the backyard isn’t as easy as barbecuing hamburgers. Distilling large quantities of ethanol typically has required a lot of equipment, says Daniel M. Kammen, director of the Renewable and Appropriate Energy Laboratory at the University of California, Berkeley. In addition, he says that quality control and efficiency of home brew usually pale compared with those of commercial refineries. “There’s a lot of hurdles you have to overcome. It’s entirely possible that they’ve done it, but skepticism is a virtue,” Mr. Kammen says.

To be sure, Mr. Quinn, 53, has been involved with successful innovations before. For instance, he patented the motion sensor technology used in Nintendo’s wildly popular Wii gaming system.

More to the point, he was the product marketing manager for Alan F. Shugart’s pioneering hard disk drive when the personal computer was shifting from a hobbyists’ niche to a major industry. “I remember people laughing at us and saying what a stupid idea it was to do that disk drive,” Mr. Quinn says.

Mr. Butterfield thinks that the MicroFueler is as much a game changer as the personal computer. He says that working with Mr. Quinn’s microelectronics experts — E-Fuel now employs 15 people — has led to breakthroughs that have cut the energy requirements of making ethanol in half. One such advance is a membrane distiller, which, Mr. Quinn says, uses extremely fine filters to separate water from alcohol at lower heat and in fewer steps than in conventional ethanol refining. Using sugar as a feedstock means that there is virtually no smell, and its water byproduct will be drinkable.

E-Fuel has bold plans: It intends to operate internationally from the start, with production of the MicroFueler in China and Britain as well as the United States. And Mr. Butterfield is already at work on a version for commercial use, as well as systems that will use feedstocks other than sugar.

Ethanol has long had home brewers, and permits are available through the Alcohol and Tobacco Tax and Trade Bureau. (You must be a property owner and agree to make your ethanol outdoors.) But there are plenty of reasons to question whether personal fueling systems will become the fuel industry’s version of the personal computer. ...

via Home Brew for the Car, Not the Beer Cup - New York Times.

2 comments:

JLB272 said...

very cool!

Pyrodin said...

Alright! Now hook up one of those to a Delorean and all we need is a flux capacitor!